Products for infrastructure

Products

Browse products for infrastructure industries.

South East Asia & Pacific

Philippines

Anticorrosive primers

Barrier Smart Pack

Barrier Smart Pack is a surface-tolerant, zinc-rich coating made for brush and roller.

Ceramically reinforced
Easy 1:1 mixing
Surface-tolerant

Topcoats

Hardtop Eco

A polyurethane topcoat with a durable, premium finish – contributing to LEED and BREEAM credits.

Durable finish
Very good colour- and gloss retention
Contributes to green building standard credits

Anticorrosive primers

Jotamastic 70

Jotamastic 70 is a fast-curing epoxy mastic primer with surface tolerance and contributing to Green Building Standard credits.

Surface-tolerant
Short overcoating intervals
User friendly

Heat resistant coatings

Jotatemp 250

A heat resistant glass flake reinforced epoxy composite coating for temperatures from -196 to 250 °C.

Heat resistant coating to temperatures between -196 °C and 250 °C
Highest temperature resistance in the market for this technology
Safety even during steam out above normal operating temperature

Anticorrosive primers

Penguard Universal

Penguard Universal is a fast drying, abrasion resistant universal epoxy coating.

Multipurpose
High robustness
Abrasion resistant

Anticorrosive primers

Penguard Pro GF

Penguard Pro GF is a glass-flake reinforced, all-round anticorrosive coating for use all year.

Fast dry-to-recoat
Fast dry-to-handle
High build

Topcoats

Hardtop AX

A polyurethane topcoat with a robust finish, very good colour and gloss retention and low VOC.

Robust finish
Easy application
Superior durability

Anticorrosive primers

Jotamastic 90

A tintable surface-tolerant abrasion resistant epoxy mastic primer for maintenance and repair, contributing to LEED and BREEAM credits.

Surface-tolerant
Tintable
Short overcoating intervals

Topcoats

Pilot II

Pilot II is an easy-to-use alkyd topcoat with a glossy finish.

Effective application
Limited waste
Reduced application cost

Anticorrosive primers

Resist 65

Resist 65 is a 65% zinc ethyl silicate primer for corrosive environments.

Designed for corrosive environments
High-volume solids
65% zinc dust content

Building - exterior

Primax Defend

Primax Defend is zinc-free powder primer with standard corrosion resistance.

Very good corrosion protection
Very good mechanical properties
Protection for up to C4 Very High corrosivity category

Topcoats

Hardtop Optima

A polysiloxane topcoat with a durable, premium finish and excellent application properties.

Outstanding durability
Excellent colour and gloss retention
Isocyanate-free for a safer work environment

Anticorrosive primers

Penguard WF

Penguard WF is a waterborne anticorrosive epoxy coating for new construction.

Versatile waterborne epoxy
Very low VOC emissions
Contributes to green building standard credits

Anticorrosive primers

Jotamastic 80

Jotamastic 80 is a surface-tolerant epoxy mastic primer designed for maintenance and repair.

Surface-tolerant
Can be applied at sub-zero surface temperatures
Good corrosion protection in atmospheric environments

Anticorrosive primers

Proguard

A two-component, polyamine-cured epoxy mastic paint with high-solids and high-build properties.

High solids
Approved for potable-water standards
Can be used as a single-coat system

Heat resistant coatings

Epoxy HR

A heat resistant phonolic/novolac epoxy coating for temperatures from -196 to 205 °C.

Heat resistant up to 205 °C continuous
Suitable for maintenance
Can be applied on hot substrates up to 150 °C

Anticorrosive primers

Marathon 550

Marathon 550 is a surface tolerant, abrasion resistant epoxy primer for high corrosivity areas.

Surface tolerant
Can be applied on damp surfaces
High abrasion and impact resistance

Topcoats

Hardtop Pro

Hardtop Pro is a premium, durable polysiloxane topcoat with a superior, long-lasting appearance.

Superior colour and gloss retention
Excellent long-lasting appearance
Excellent application properties

Showing 18 of 83 items

Most searched terms

Go to

Products